ASTM F2413-24 Standards define minimum performance, design, testing, classification, fit, and functional requirements for protective safety-toe footwear used against workplace hazards. The current ASTM edition is F2413-24, which replaced F2413-18 as the active edition.
For buyers sourcing from overseas, understanding ASTM F2413-24 Standards before negotiating a bulk order can prevent expensive specification, testing, and compliance problems.
What Is ASTM F2413-24?
Content Nav
ASTM F2413-24 Standards define the minimum performance requirements for protective (safety) toe cap footwear used in U.S. It covers impact resistance, compression resistance, and optional protections against metatarsal impact, puncture, electrical hazards, static electricity, and now standardized slip resistance.
The standard works together with ASTM F2412, which details the laboratory test methods. OSHA relies on these consensus documents under 29 CFR 1910.136 when employers must provide foot protection. ASTM F2413-24 Standards are not a manufacturing recipe; they set the pass/fail thresholds that safety shoes must meet under controlled tests. Any later change—aftermarket inserts, resoling, or non-original components—can void the marking. Buyers who insist on clear references to ASTM F2413-24 Standards in contracts avoid most of these downstream issues.
ASTM F2413-24 Safety Shoe Requirements Explained
Every pair of ASTM F2413 safety shoes claiming protective toe performance must clear two baseline tests.
Impact resistance (I) requires the toe area to absorb 75 foot-pounds of energy—roughly a 50-pound weight dropped from about 18 inches—while leaving enough clearance for the toes. Compression resistance (C) demands the same clearance after a 2,500-pound crushing load. Clearance targets are 0.500 inch for men’s lasts and 0.468 inch for women’s lasts.
Additional protections appear on the label only when the footwear has been tested for them:
- Mt for metatarsal guards
- PR for puncture resistance of the sole
- EH for electrical hazard resistance
- SD or Cd for static dissipative or conductive properties
- SR for slip resistance (minimum 0.40 coefficient of friction on wet and dry quarry tile)
- SRO for the higher oily-wet performance (0.33 COF on oily surfaces)
In 2026 many safety shoes manufacturers also integrate lighter composite toe caps and improved outsole compounds that hold traction longer under real job-site conditions. These material advances do not replace the standard; they help products meet ASTM F2413-24 Standards while reducing weight and improving comfort. Specifying ASTM F2413-24 Standards on the purchase order remains the simplest way to lock in these performance levels.
ASTM F2413-24 vs ASTM F2413-18: What Changed?
The comparison of astm f2413-18 vs astm f2413-24 centers on one major addition and several clarifications. Impact, compression and puncture thresholds carried forward. Astm f2413-18 safety shoes already in service remain compliant in most programs, and there is no recall clause hiding in the 2024 text.
| Area | F2413-18 | F2413-24 |
|---|---|---|
| Slip resistance | Claimed but not inside the specification | SR and SRO formalised through ASTM F3445-21 |
| Gender marking | M and F only | U (unisex) added alongside M and F |
| Definitions | 2018-era wording | Updated for composite toes, TPU and polymer construction |
| Test alignment | Linked to then-current F2412 | Updated to current F2412 and F2913 revisions |
| Status in 2026 | Withdrawn; still in old inventory | Current edition |
Which leaves one practical decision. New specifications and new inventory should name the current edition: ASTM F2413-24 Standards. Stock labelled F2413-18 can usually keep being issued, because the protection behind the label never got weaker. What you cannot do is tender from a twenty-year-old spec sheet — if it mentions tiered ratings like I/50 or C/50, it predates 2018. Clear reference to ASTM F2413-24 Standards in RFQs removes most of that ambiguity.
ASTM F2413-24 vs EN ISO 20345
When purchasing safety footwear, international buyers often compare the two mainstream standards: ASTM F2413-24 Standards and EN ISO 20345. Both address similar workplace hazards, but they differ in their technical frameworks, classification systems, and testing methods.
EN ISO 20345 is an internationally recognized standard that specifies the basic and additional requirements for safety footwear, covering protection against mechanical risks, slip resistance, protection against thermal risks, and ergonomic performance. It applies to the European market and most international markets.
ASTM F2413-24 Standards, on the other hand, is a U.S. standard specifically designed for footwear with safety toe protection. It defines performance categories such as impact resistance, compression resistance, puncture resistance, electrical shock resistance, electrostatic dissipation, and metatarsal protection, and is applicable in the United States and markets that follow U.S. standards.
| Area | ASTM F2413-24 | EN ISO 20345 |
|---|---|---|
| Main market association | United States | Europe and international markets |
| Toe protection | Impact and compression requirements | Safety-toe requirements |
| Puncture protection | PR classification | Different penetration classifications |
| Electrical properties | EH, SD, and conductive categories | Different European classifications |
| Marking approach | ASTM protection codes | SB, S1, S2, S3, S6, S7, and other classifications |
| Compliance | Based on applicable ASTM requirements | Based on applicable EN ISO requirements |
For importers, the key point is this: meeting one standard does not automatically mean meeting the other. If a product is intended for sale in multiple markets, it is essential to clearly identify the standards that must be followed during the product development and testing phases. Dual-marked pairs that satisfy both ASTM F2413-24 Standards and EN ISO 20345 remain the cleanest solution for global programs.
How to Choose ASTM F2413-24 Safety Shoes for Different Industries
When selecting safety shoes that comply with the ASTM F2413-24 standards, the first step is not to look at product images or marketing materials, but to conduct a workplace risk assessment.
Construction
When purchasing safety shoes for the construction industry, it is recommended to first translate on-site risks into a verifiable list of performance requirements: impact and crush protection for the toe cap, puncture resistance, slip-resistant outsoles, outsole durability, waterproof construction when necessary, and electrical protection required for specific job types.
Footwear built to ASTM F2413-24 Standards gives buyers a clear baseline for these claims. Sturdy steel-toed boots suit heavy-load sites, while lightweight composite-toed designs often work better for crews that walk long distances—both can meet ASTM F2413-24 Standards when properly tested.
Manufacturing
In a manufacturing plant environment, the selection of safety footwear must be closely aligned with actual production risks: the toe cap should provide impact and crush resistance, the outsole must be slip-resistant to handle oily or slippery surfaces, and if sharp metal debris is present, a puncture-resistant midsole is required; In settings such as electronics or precision assembly, electrostatic control properties (such as antistatic or conductive features) are critical, while specific processes may also require chemical or oil resistance.
Warehousing and Logistics
In warehouse environments, workers often have to stand for long periods and walk frequently; therefore, when selecting footwear, it is important to strike a balance between toe protection and long-term comfort. Key considerations include: impact- and crush-resistant toe protection (either steel or composite), and a slip-resistant, durable outsole to handle wet or rough surfaces; at the same time, the shoe should be lightweight and offer good breathability and cushioning to reduce foot fatigue.
Mining
Safety boots for the mining industry need higher overall protection. Toe caps must meet impact and compression requirements under ASTM F2413-24 Standards, midsoles must resist puncture from sharp rock, and outsoles need aggressive traction plus durability. Waterproof constructions are common where wet conditions prevail. Clear reference to ASTM F2413-24 Standards helps filter out under-specified product.
Oil and Gas
In the oil and gas industry, work sites often present multiple risks simultaneously, such as oil spills, chemicals, slippery surfaces, and impacts from heavy objects.
Therefore, when purchasing safety shoes, it is necessary to comprehensively consider various protective features: the outsole must be slip-resistant and oil-resistant to handle the oil spills and slippery surfaces commonly found on drilling platforms, in refineries, or during pipeline maintenance; the toe cap must provide impact and crush resistance; if electrical work is involved, appropriate models offering electrical shock protection or static dissipation should also be selected; at the same time, the upper and outsole materials must be resistant to chemical exposure and waterproof to withstand outdoor or high-washdown environments.
FAQ: ASTM F2413-24 Standards
Q1: Is ASTM F2413-24 the current standard?
A1: Yes. ASTM lists F2413-24 as the active edition. Buyers should reference ASTM F2413-24 Standards in new contracts and specifications.
Q2: What does ASTM F2413-24 mean on safety shoes?
A2: It means the pair was tested and certified to the 2024 edition of the US performance standard for protective toe footwear, covering at minimum I/75 impact and C/75 compression. Any extra letters — PR, EH, Mt, SR — are claims the pair actually passed, not decoration.
Q3: What is the difference between SR and SRO?
A3: Both are tested to ASTM F3445-21 using the F2913 whole-shoe method. SR requires a coefficient of friction of at least 0.40 on wet and dry quarry tile. SRO adds a pass at 0.33 or better on oily-wet surfaces, which is the rating for kitchens, refineries and machine shops.
Q4: What is the difference between ASTM F2413-24 and F2413-18?
A4: F2413-18 is a previous edition, while F2413-24 is the current active edition. Buyers should verify which edition is referenced in the supplier’s documentation and purchase specification.
Q5: What is the MOQ for ASTM F2413-24 safety shoes?
A5: Our MOQ varies by product style and manufacturing process. Standard styles require 300-500 pairs, while certain special styles may have higher minimum orders.
Q6: What are the time, costs, and shipping fees for sample production?
A6:
- The sample preparation time depends on product complexity and scheduling, with standard safety shoes typically requiring 7-10 days.
- Free sample for the first pair, additional pairs incur a sample fee refundable with bulk shipment.
- The customer shall bear the cost of mailing.
Want to Bulk Wholesale Safety Shoes with Best Prices?
Looking for a reliable safety shoes manufacturer for wholesale, OEM, or private-label orders? MKsafety provides ASTM-compliant safety footwear for construction, manufacturing, mining, logistics, and other demanding work environments.
From custom safety shoes and logo customization to product development and bulk production, our team can help you choose the right protection and specifications for your market.
👉 Request our latest catalog and bulk pricing today.
