Last time I shared with you a brief introduction about insulated work shoes. The life of insulated work shoes is closely related to the working environment. Insulated work shoes also need better maintenance and storage measures during wearing. Proper use and maintenance can maintain the service life of labor insurance shoes. Today I will share with you some tips for maintaining and storing insulated work shoes. You can choose according to your own needs.
Tips for using and storing insulated work shoes
On rainy days, after the insulated labor insurance shoes are exposed to rain, first remove the dirt, suck out the water in the shoes, then stuff them with a desiccant (if not, you can replace them with cardboard) and put them in a ventilated and cool place to dry.
After half an hour, Change the desiccant again. After drying, apply raw chicken oil, and then apply shoe polish again. Put the shoe polish on again after two days, and avoid exposure to the sun and baking. The moisture-proof of insulated labor insurance shoes is mainly to put a little moisture-proof agent in the shoe box or inside the shoes, and choose a dry place for storage.
We should buy several pairs of safety shoes and wear them in rotation. If we wear the same pair of safety shoes too frequently, it will cause frequent bending loads on the upper and sole, which will be easily damaged.
The soles are prone to wear and deformation, affecting gait and causing leg and foot diseases. Insulated labor insurance shoes have a strong ability to absorb sweat. Timely replacement of shoes can allow moisture and sweat to fully dissipate, protecting the physiological functions of the feet.
We wear insulated work boots all seasonally. Different safety shoes are suitable for different seasons. The insulated work boots replaced after the season should be stored and preserved. The focus should be on moisture-proof, mildew-proof and preventing deformation of insulating safety shoes.
Seasonal leather shoes should be cleaned of dirt, sludge and dust in time and carefully. If there are cracks on the upper, it should be repaired, and then the shoe polish should be carefully applied. Do not apply too much shoe polish when storing, because the shoes are volatile and dry to a certain extent.
If you apply too much shoe polish and store it for a long time, it will cause the leather surface to dry out. It is best to apply a little raw chicken oil, raw lard or glycerin when storing, so as to keep the leather surface soft and moist without deformation.
When it rains, we must dry the replaced safety shoes, put some mothballs in the shoes after the shoe polish is finished, to prevent insects from eating.
It should be stored and preserved in a ventilated place, and pay attention to dust. Take it out regularly to polish the shoe polish, especially in the mildew rain season, take it out and blow it in the air, if there is mildew, use a soft cloth brush to remove the mildew, and replenish the shoe polish in time.
Tips for maintenancing insulated work shoes
Next, I will teach you some methods of daily maintenance of insulated work shoes：Insulated leather shoes are suitable for wearing as auxiliary safety equipment and labor protection equipment when working on electrical equipment with AC 50Hz, below 1000V or DC below 1500V.
Staff use insulated leather shoes, which can be used with basic appliances to touch live parts, and can be used to protect against clicks caused by step voltage. Step voltage refers to the potential difference between two points in the direction of the maximum potential gradient of 0.8M on the ground when the electrical equipment is grounded.
Labor insurance shoes should be careful not to get wet. It is strictly forbidden to use after getting wet. Once damp, put them in a ventilated and cool place to dry naturally to avoid deformation and damage to leather shoes. After the sole is pierced by foreign matter, it cannot be used as insulating leather shoes.
Pay attention to the maintenance of the leather surface of the leather shoes, and polish the shoes frequently.
The recommended way to wipe is: first wipe off the dust on the surface of the leather shoes with a clean soft cloth, then squeeze the shoe polish onto the cloth and apply it evenly on the shoe surface, wait for a while (the shoe polish is slightly dry) and then wipe it off.Can not be in contact with oil, acidic, alkaline and sharp substances to prevent corrosion, deformation and damage.
It is normal for labor insurance shoes to have slight wrinkles and slight deformation after wearing. After the leather shoes are wet or sweaty, they are prone to salt and frost phenomenon. It is recommended that if there is a phenomenon of salt frost, you can use gauze or cotton with a small amount of warm water to wipe off the white salt frost on the upper, put the shoes in a ventilated place to dry, and then wipe them with shoe polish. Repeat several times to restore the original state. So keep your shoes dry.
When storing, leather shoes should be kept clean, dry and laid flat naturally. After storing for a period of time, the leather shoes should be ventilated, cool and dry frequently, and the shoe polish should be re-wiped to prevent mildew.
This is all about the knowledge about the use, storage and maintenance of electrical insulating shoes today, and I hope it will be helpful to everyone in their daily wear.
